Whc Solar Inverter

Three Phase Solar Inverter 15KW

WHC SOLAR 15KW three phase inverter use high-speed microprocessor (MCU) and programmable logic devices (CPLD), the control software programming.Power device adopts the most advanced fifth-generation low loss of high power IGBT and static switch.This series of
products is the latest control devices and the most advanced software for the integration of
power supply products.Widely used in building lighting, road lighting, electric power,
communications, medical, industrial mining enterprises etc.
  • Brand:

    WHC SOLAR
  • Lead Time:

    15days
  • Power:

    15KW
  • Solar Input Voltage:

    --
  • Solar Charge Current:

    --
  • Battery Input Voltage:

    DC192V
  • AC Charge Current:

    10A
  • AC Input Voltage:

    380V
  • Output Voltage & Frequency:

    AC220V&380V;50HZ
  • Output Waveform:

    Pure sine wave
  • Ctn Sizes:

    580*750*920mm
  • Weight:

    200kg
  • Product Detail

Three Phase Solar Inverter 15KW 


15KW three phase solar inverter

brief introduction of the function

No.

component

function

① 

Wiring terminal

City power inputbattery inputinverter outputearth wiresee detail by figure1 and figure2

① 

Switch of battery input

Control of the battery connected

② 

switch of inverter output

Control of the output load

Switch of city power input

Control of city power connected

LCD display

Display the parameters of the inverter.

open/close button

When the switch “ON”is battery priority, when the switch “OFF” is grid 

power priority or that is grid power priority

fan

The breeze cooling is inside the inverter, be careful not to have stuff to jam.

485 communication

Communication interface.


1、Introduction                                                                    
1.1 Directions for use
   1.1.1、This series of products use high-speed microprocessor (MCU) and programmable logic devices (CPLD), the control software programming.Power device adopts the most advanced fifth-generation low loss of high power IGBT and static switch.This series of products is the latest control devices and the most advanced software for the integration of power supply products.Widely used in building lighting, road lighting, electric power, communications, medical, industrial mining enterprises etc.
   1.1.2、In some cases, the inverter device can cause radio interference, some sensitive devices (such as television, radio, etc.) may be disturbed, soyou should protect the interference from it for a long distance.
   1.1.3、Before installing and using the inverter,pls read the user manual detailedly.
1.2 Notes
1.2.1、  If the inverter should be connected "grounding" system, firstly put the ground wire of the main input power  receiving   to the  terminal row which has indicated "PE" or "G" of inverter .
1.2.2、 When the inverter is under the situation of the switch of input,battery and output disconnected, non-professional technical personnel do not open the inverter shell, otherwise it may cause harm to the inverter and the operator.
1.2.3、When it  need to replace the fuse, you should use only the  fuse of the same specification.
1.2.4、Battery of the inverter should be replaced by professional and technical personnel,the battery which is replaced  must be handled by recycling agencies, used batteries according to law is classified as "toxic waste".
1.2.5、The battery of the inverter  in quiet place automatically discharge and the chemical energy of the battery will automatically consume at the same time.Due to the above the reason battery must be recharged in every three months , requesting  the environment temperature of surrounding is about 20 ℃, if the temperature is about 30 degrees Celsius, the battery will charge once every two months.The best  working temperature of battery is 20 ~ 25 ℃.
1.2.6、Inverter should be installed in the ventilation place, do not block all vents.
1.2.7、Don’t protect or use the product in the following environment :
★The place with combustible gases, corrosive substances  or a large amount of dust
★The place is unusually high or low temperatures (40 ℃ above or below 0 ℃), high humidity (90%)
★The places where direct sunlight or near a heating appliance
★The places where violent vibration
1.2.8、Pls install the product according to the user manual strictly.

2、Installation and wiring                                                                  
2.1 Installation environment
Ensure the following indoor environment when installed
2.1.1 Not a lot of dust
2.1.2 The indoor temperature is  appropriate
Inverter can be operated under the indoor environment from 0 ℃-40 ℃,but the temperature of starting should be exceed 0 ℃ and the best operating temperature is 25 ℃. Installation environment need to have a good heat dissipation system, the following is the feasible method. 
★Natural ventilation system: only applies to low heat and broad space.
★Artificial ventilation system: when the temperature of the casing (TA) is higher than the peripheral temperature (TE) when you need to install air conditioning.The closer when the temperature, the capacity of the convulsions system will be relatively increased, calculation and can use the following equations:
Q(m3/h)=3.1+Pdiss(kcaW)/(ta-te)(c) gives off heat in all installed equipment Pdiss expressed in KcaW, to  higher Pdiss10 % to allow a loss of energy.
2.2 Check before installation
Open packaging to take out the inverter power supply, check the inverter power supply whether there is any damage in transit, whether random data is complete, the accessories including: 
Accessories quantity unit
User manual 1 pc

2.3 Installation site
Ensure the following environment condition
2.3.1、The distance between back of inverter power and wall or any object≥40cm;
2.3.2、The top of the inverter power supply shall not put any objects;
2.3.3、Right in front of the inverter power supply and above must prepare the sufficient maintenance space;
2.3.4、Battery tank placed must set aside enough space, so that for battery maintenance;
2.4 Connection
2.4.1、When the  inverter before connecting the main input power and load equipment, you should disconnect all of the switch.
2.4.2、Input and output lines to connect as shown:


contact us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
ST-300W
Battery Inverters - 300W Power inverter Dc to Ac Converters - ST-300W
ST 300W inverter is a device that converts DC 12v or 24v direct current power from solar battery or car or lithium battery , to standard AC 220v alternating current  power for general appliances.
48V6000W Inverter
Solar Inverters - 6000W Low Frequency Inverters Pure Sine Wave Combined Charger 48V - Whc Solar-6048
WHC SOLAR 6KW Pure sine wave inverter can load All kinds of home appliances, office equipment, solar power system, and other equipment which use single phase power.
5500W Solar Hybrid inverter
Solar Inverters - Hybrid Inverter 5500W 48V MPPT100A - 5.5KW Solar HVM Inverter
Hybrid Inverter 48V5500W MPPT100A  PV500V Solar Power Inverter Working without battery
China Leading Solar Inverters - Hybrid Inverter 3500W 24V MPPT100A - 3.5KW Solar HVM Inverter Manufacturer
Solar Inverters - Hybrid Inverter 3500W 24V MPPT100A - 3.5KW Solar HVM Inverter
Hybrid Inverter 24V3500W MPPT100A  PV500V Solar Power Inverter Working without battery
20KW Solar Inverters
Solar Inverters - 20KW IGBT Power Electronics Inverter 192V - Whc Solar-20192
WHC SOLAR 20KW Inverter-High reliability.Frequency tracking,noise filtering and low distortion in inverter output because of double-conversion design
WHC 12V 200Ah
Gel Battery - WHC 12V 200Ah Agm solar Batteries WHC200-12
Best Price Whc 12v 200ah Agm Deep Cycle Gel Rechargeable Solar Storage Battery For Home Power System,applications In Solar Panel System,wind Power System,ups System etc.
Max Solar Street Light
Solar Street Light - Max100W120W150W Integrated LiFePo4 Solar Led Street Light - WHC SOLAR
 WHC SOLAR MAX100W120W150W Integrated LiFePo4 Solar Street Light, Safe and efficient, fast charging and large capacity come LifePo4 battery.
5500W Solar Hybrid inverter
Solar Inverters - Hybrid Inverter 5500W 48V MPPT100A - 5.5KW Solar HVM Inverter
Hybrid Inverter 48V5500W MPPT100A  PV500V Solar Power Inverter Working without battery
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact